EQUIPMAX 1.0-1.5T three wheel electric forklift adopts the latest technologies and ergonomics concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched productivity, safety and ergonomics designing for operator. It can be widely used in factory, warehouse, logistic center and especially in cold storage and food industry.
-
Avenue des Hydrocarbures
Tokoin Soted(face station T-OIL)
-
Appelez-nous au
(+228) 22-22-74-30
(+228) 99-40-73-01
-
Ecrivez nous sur
support@fastsolution.fr
Introduction
EQUIPMAX 1.0-1.5T three wheel electric forklift adopts the latest technologies and ergonomics concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched productivity, safety and ergonomics designing for operator. It can be widely used in factory, warehouse, logistic center and especially in cold storage and food industry.
Electrical system
The DALA, ZAPI, CURTIS and SME AC controller with microprocessor control system of the motor speed and temperature feedback signal ,regenerative braking and CANBAUA universal interface to ensure the accurate control of driving and lifting system. The regenerative braking can capture and reserve energy while braking.
The subsidiary pump motor controller will put into operation by the system automatically while lifting in need of the high flow oil pressure, this will avoid the extra energy consumption and extend battery life.
The emergency power disconnect switch is within easy reach while emergency events
Multifunctional display provides extensive information on truck operation and maintenance state, it with waterproof and shock proof protection. The advanced wiring harness, waterproof connectors and multiunit fuse module ensure the security and reliability of the circuit.
Driving and transmission system
Full suspension type of semi-axis for the driving axle, and it only bear the torque and other load is born by the outside case.
TCM technology transmission with floating system highly reduces the forklift vibration and noise.
Hydraulic system
Japanese Shimadzu multi valves and gear pump, and the Japanese NOK sealing elements. The high quality hydraulic components and rational distribution of the pipes helps to control the oil pressure and highly improved the forklift performance.
Steering and brake system
Adopt latest manufactured low- input torque redirector. The steering pull in place is only 6-8N, which is less than former one by 50%.
Steering axle adopts up and down type steering rod, with simple structure and better intensity and its both ends adopt joint bearing, enhancing the installation hole of joint bearing. The performance of steering axle is more reliable.
TCM technology brake system which is sensitive and light full hydraulic with a better performance braking.
Technical Specification
| 1 | Brand | EQUIPMAX | EQUIPMAX | |
| 2 | Model | FB10S | FB15S | |
| 3 | Power Type | Electric | Electric | |
| 4 | Operation Type | Seated Type | Seated Type | |
| 5 | Load Capacity | Q(Kg) | 1000 | 1500 |
| 6 | Load Center | C(mm) | 500 | 500 |
| 7 | Front Overhang | X(mm) | 196 | 196 |
| 8 | Wheelbase | Y(mm) | 1130 | 1130 |
| 9 | Service Weight (With Battery） | kg | 2120 | 2150 |
| 10 | Wheel Type | F Rubber/R Polyurethane | F Rubber/R Polyurethane | |
| 11 | Driving Wheel | ∅×w(mm) | ∅230×110 | ∅230×110 |
| 12 | Front Wheel | ∅×w(mm) | ∅305×127 | ∅305×127 |
| 13 | Front Wheelbase | mm | 752 | 752 |
| 14 | Mast Tilting Angle (F/R) | α/β(°) | 2/4 | 2/4 |
| 15 | Mast Lowered Height | h1(mm) | 2035 | 2035 |
| 16 | Free Lift | h2(mm) | 0 | 0 |
| 17 | Lifting Height | h3(mm) | 3000 | 3000 |
| 18 | Mast Extended Height | h4(mm) | 3918 | 3918 |
| 19 | Height of Overhead Guard | h13(mm) | 1930 | 1930 |
| 20 | Fork Clearance Mast Lowered | h(mm) | 35 | 35 |
| 21 | Overall Length (With Fork) | L1(mm) | 2680 | 2680 |
| 22 | Overall Length to Fork Face | L2(mm) | 1610 | 1610 |
| 23 | Overall Width | b1(mm) | 880 | 880 |
| 24 | Fork Size | s/e/l(mm) | 35/100/1070 | 35/100/1070 |
| 25 | Fork Spread | b5(mm) | 210-580 | 210-580 |
| 26 | Min. Ground Clearance | m2(mm) | 60 | 60 |
| 27 | Aisle Width for Pallet 1000*1200 | Ast(mm) | 2931 | 2931 |
| 28 | Min. Turning Radius | Wa(mm) | 1425 | 1425 |
| 29 | Max. Travel Speed (Unladen/Laden) | km/h | 5.2/5 | 5.2/5 |
| 30 | Lifting Speed (Unladen/Laden) | m/s | 0.135/0.095 | 0.135/0.090 |
| 31 | Lowering Speed (Unladen/Laden) | m/s | 0.085/0.120 | 0.085/0.120 |
| 32 | Max. Gradeability (Unladen/Laden) | ％ | 6/4 | 6/4 |
| 33 | Service Brake | Hydraulic+Electromagnetic | Hydraulic+Electromagnetic | |
| 34 | Drive Motor | kw | 1.5 AC | 2.5 AC |
| 35 | Lift Motor | kw | 3.0 DC | 3.0 DC |
| 36 | Battery | V/Ah | 24V/270Ah | 24V/300Ah |
| 37 | Charger | V/A | 24V/40A | 24V/40A |
| 38 | Type of Drive Control | AC | AC | |
| 39 | Noise Level | dB(A) | 75 | 75 |
* EQUIPMAX retains the right to adjust the specification and configurations to improve the performance without notice, please contact us at info@EQUIPMAX-industries.com to get the newest information.